Spacer Rings
Правила форума
Пожалуйста, ознакомьтесь с правилами данного форума
Пожалуйста, ознакомьтесь с правилами данного форума
- ingvar
- Маньяк
- Сообщения: 2549
- Зарегистрирован: 26 июл 2006, 11:19
- Откуда: Vancouver
Spacer Rings
Has anyone used wheel spacer rings for brake rotors (between a rotor and a hub) to center brake rotors?
- TOLM
- Маньяк
- Сообщения: 3548
- Зарегистрирован: 26 авг 2012, 16:22
- Откуда: Владивосток-Москва-Суррей
Re: Spacer Rings
Zabei
- ingvar
- Маньяк
- Сообщения: 2549
- Зарегистрирован: 26 июл 2006, 11:19
- Откуда: Vancouver
Re: Spacer Rings
??TOLM писал(а):Zabei
- Vog
- Завсегдатай
- Сообщения: 229
- Зарегистрирован: 02 май 2007, 06:29
Re: Spacer Rings
I don't think there are spacers which go between rotor and hub... it's quite impossible... Unless you're trying to fit different rotor, which is not good idea.
- ingvar
- Маньяк
- Сообщения: 2549
- Зарегистрирован: 26 июл 2006, 11:19
- Откуда: Vancouver
Re: Spacer Rings
Yes, it is a different rotor (a bit). The outer diameter of that rotor is the same as the one of the original, as well as the thickness. The hub is 4mm larger in diameter. If spacer rings are used then it is centered, and lug nuts will fasten the rotor.Vog писал(а):I don't think there are spacers which go between rotor and hub... it's quite impossible... Unless you're trying to fit different rotor, which is not good idea.
The original one is quite pricey - around 350$ (US made). The supplement is only 100$.
There are spacers that go between a wheel and a hub (use them). Why not use such spacers between a rotor and a hub.
- Vog
- Завсегдатай
- Сообщения: 229
- Зарегистрирован: 02 май 2007, 06:29
Re: Spacer Rings
Ok, then it's not spacer it's centric ring.
Spacers are used to change offset of wheel. I thought you are trying to center rotor within the bracket which holds brake pads...
If the difference in rotors is ONLY center hole diameter, then it should be OK.
I never heard about centric rings for rotors. Search it or worst case you'll need to order it.
Spacers are used to change offset of wheel. I thought you are trying to center rotor within the bracket which holds brake pads...
If the difference in rotors is ONLY center hole diameter, then it should be OK.
I never heard about centric rings for rotors. Search it or worst case you'll need to order it.
-
- Маньяк
- Сообщения: 4878
- Зарегистрирован: 18 авг 2008, 14:51
Re: Spacer Rings
Не понял как там суппорта будут, если ротор сместится вдоль оси ???